HHB CDR830 Burn it

HHB CDR830 Burn it

Overview

As you'd expect from HHB, value and quality are inherent in the design and engineering of the new HHB CDR830 BurnIT CD Recorder.

Featuring high precision 24 bit A-D converters with 24 bit multi-level Delta Sigma D-A converters, the CDR830 BurnIT delivers recordings of the highest possible quality. The precise design of the CD laser assembly means that every single CD-R and CD-RW disc written by the BurnIT is exceptionally accurate, providing greater compatibility with other CD players and recorders. Solidly built for studio use, the BurnIT records on readily available, low cost discs and features an SCMS-free digital input with 3 easy to use synchro record modes and a built-in sample rate converter.

Specifications

• Format Compact Disc Recordable
• Compatible discs CD (playback), CD-R and CD-RW
• Channels 2 (stereo)
• Power supply (Europe/Asia model) AC 230V, 50/60Hz
• Power supply (US/Canadian model) AC 120V, 60Hz
• Power consumption 14W
• Operating temperature +5C to +35C (+41F to +95F)
• Weight (without packaging) 3.5kg (7.7lbs)
• Weight (with packaging) 5.5kg (12.1lbs)
• Maximum dimensions (WxDxH):
  • 482 x 295 x 105mm
  • (89mm high without feet)
  • 19.0 x 11.6 x 4.1 inches (3.5 inches high without feet)
• Remote control Infra-red
• Accessories:
  • Power cord, remote control unit,
  • 2 x AA/R6P dry cell batteries, audio cable,
  • operating instructions, HHB CDR80 Silver disc,
  • HHB recording media brochure, HHB registration card.

  Audio

• Frequency response 10Hz to 20kHz 0.5dB
• RCA phono output level (0dBFS, >10k load) 9dBu
• Wow & flutter Unmeasurable
• Playback
  • Signal to noise ratio >111dB
  • Dynamic range >98dB
  • Total harmonic distortion @ 1kHz <0.002
  • Channel separation >98dB
  • Recording (analog input)
  • Signal to noise ratio >92dB
  • Dynamic range >92dB
  • Total harmonic distortion @ 1kHz <0.003
• Recording (digital SPDIF input)
  • Signal to noise ratio >108dB
  • Dynamic range >97dB
  • Total harmonic distortion @ 1kHz <0.002
  • All audio measurements are to EIAJ standards.

  I/O CONNECTIONS

• Analog connectors
• Unbalanced line input RCA phono (input impedance 10k?)
• Unbalanced line output RCA phono
• Headphone output 1/4" stereo jack
• Digital connectors
  • Optical digital input (SPDIF)
    • TOSlink, optical
    • wavelength 660nm 30nm
  • Optical digital output (SPDIF)
    • TOSlink, optical
    • wavelength 660nm 30nm
  • Coaxial digital input (SPDIF)
    • RCA phono, 75?,
    • IEC958 type II
  • Coaxial digital output (SPDIF)
    • RCA phono, 75?,
    • IEC958 type II