Audio Technica AE2500

Audio Technica AE2500

Audio Technica AE2500 Description:

The dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, which is practically unachievable with 2 separate mics. Robust design provides enduring dependability on the road. Features an integral 80Hz HPF switch and a 10dB pad. Includes the new AT8471 isolation clamp.

The ultimate kick-drum mic, the Artist Elite AE2500 dual-element instrument microphone features cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic element's side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability.

Audio Technica AE2500 Features:

• Revolutionary dual-element design
• Condenser and dynamic elements are contained in a single housing
• Elements are positioned in a perfect phase relationship
• Robust design provides enduring dependability on the road
• Integral 80Hz HPF switch and a 10dB pad
• Includes the new AT8471 isolation clamp

Audio Technica AE2500 Specifications:

• ELEMENTS Condenser, dynamic
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 20-17,000 Hz (condenser)
• 30-10,000 Hz (dynamic)
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave (condenser)
• OPEN CIRCUIT SENSITIVITY -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
• -54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
• IMPEDANCE 100 ohms (condenser)
• 600 ohms (dynamic)
• MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
• 158 dB SPL, with 10 dB pad (nominal)
• DYNAMIC RANGE (typical) 124 dB, 1 kHz at Max SPL (condenser)
• SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa (condenser)
• PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical (condenser)
• SWITCHES (Condenser Only) High-pass filter;
• 10 dB pad (nominal)
• WEIGHT 13.8 oz (390 g)
• DIMENSIONS 6.50" (165.0 mm) long,
• 2.17" (55.0 mm) maximum diameter
• OUTPUT CONNECTOR Integral 5-pin XLRM-type
• CABLE 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
• ACCESSORIES FURNISHED AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• AUDIO-TECHNICA CASE STYLE R8

Get your Audio Technica AE2500 today!